Clearray Replacement Bulb
This bulb needs to be changed every 12 months. You may get a "blb", 616 error on your control panel. It is a reminder to change the bulb.
High-Intensity, ultraviolet light-emitting 5 watt lamp. 7" length.
Lamp life exceeds 13,000 energized hours
Permanent PVC protective caps and shock dampening spring ensure lamp will not become loose during transit
Internal 316L stainless steel sealing mechanism ensures that quartz shroud protecting the lamp will not distort or leak
Long life electronic lamp ballast
Treats 99.9% of waterborne pathogens
UV Lamp continues to emit dosage of 30mg/cm2 near end of life
How to replace CLEARRAY® Bulb
CLEARRAY® BULB REPLACEMENT AND QUARTZ TUBE MAINTENANCE
1. Turn the breaker to the spa OFF. We recommend that you drain your spa. Disconnect the CLEARRAY® System from the controller, Figure
2. Once the UV lamp has cooled off remove the CLEARRAY® System enclosure cover and gasket by removing the four screws.
DANGER: NEVER REMOVE COVER WITHOUT FIRST TURNING OFF AT POWER SOURCE.