A crystal clear and hygienic Jacuzzi® experience starts with a clean filter. As a Jacuzzi® owner, you understand the importance of having a high-quality filter system to ensure optimal performance and water quality. However, with time and usage, even the best filters become clogged with debris and impurities, reducing their efficiency and lifespan. Fortunately, replacing your Jacuzzi® filter is a simple and straightforward process that can be done in just a few steps. In this guide, we’ll take you through the process step by step, so you can maintain your Jacuzzi® in peak condition and enjoy countless hours of relaxation and rejuvenation.

How to Change a Jacuzzi® 200™ Series Filter

  1. Turn off the power to the breaker to prevent the filter cycle from running
  2. Remove the filter cover (Lift up)
  3. Unscrew the filter counter-clockwise
    • If you have trouble, stick your fingers in the pleats for a better grip
  4. Put in the new filter
  5. Move the filter until it is seated in the cavity
  6. Turn clockwise
  7. Once it’s in tightly, replace the cover

How to Change a Jacuzzi® 300™ Series Filter

  1. Turn off the power to the breaker to prevent the filter cycle from running
  2. Remove the filter cover (Lift up)
  3. Unscrew the filters counter-clockwise
    • If you have trouble, stick your fingers in the pleats for a better grip
  4. Put in the new filters
  5. Set the filters into place
  6. Turn clockwise
  7. Once they’re in tightly, replace the cover
    • The cover clips in on the back at the top and push down

How to Change a Jacuzzi® 400™ Series Filter

  1. Turn off the power to the breaker to prevent the filter cycle from running
  2. Remove the filter cover (Lift up)
  3. Remove the Standard Filter
    • Unscrew the filter counter-clockwise
      • If you have trouble, stick your fingers in the pleats for a better grip
  4. Put in the new standard filter
    • Set the filter into place
    • Turn clockwise
  5. Remove the MicroClean® Filter
    • Unscrew the filter counter-clockwise
      • If you have trouble, stick your fingers in the pleats for a better grip
  6. Remove the pin connecting the top filter and the gray MicroClean® holder
  7. Remove the MicroClean® Filter from the holder
  8. Put the new MicroClean® Filter into the holder
  9. Re-insert the pin that connects the top filter to the MicroClean® holder
  10. Set the filter into place and turn it clockwise
  11. Once the filters are in tightly, replace the cover
    • The cover clips in on the back at the top and push down

Pro Tip: MicroClean® Filters cannot be cleaned, but the pleated filters can. They also need to be changed more frequently.

Conclusion

You now have successfully learned how to replace your Jacuzzi® filter and have taken an important step towards maintaining optimal performance and water quality in your spa. With a clean and efficient filter, you can enjoy a luxurious and rejuvenating Jacuzzi® experience with peace of mind. Remember, it’s important to clean and replace your Jacuzzi® filter on a regular basis to ensure maximum efficiency and longevity. We hope this guide has been helpful and informative, and we’re always here to answer any questions you may have about maintaining your Jacuzzi®. Keep enjoying your Jacuzzi® and all the benefits it has to offer!