We show you how to replace a Pump on your Above Ground Swimming Pool Carvin Filter System.
First thing is turn the power off and unplug it from the power source. Then shut the valve on the front of the pump and on the side of the filter. Then remove the pipe fitting on the side and on the front of the pump. Remove the screws holding the pump to the frame. Now to pump should free to remove. Remove the fitting from the side of the old pump and check the O-ring before putting it on the new pump. Place the new pump back on the frame, check the fitting O-ring before attaching it to the new pump. Same thing on the front check the O-ring before attaching it. Replace the screws back on the pump frame. Open the valves and plug the pump back it and turn it on and checks for leaks.